Sekonic L-758 Spezifikationen PDF herunterladen (Seite 3)

Measuring functions and features

②

③

Exposure Profiling

1° Spot with Digital Display

Other Functions

Features

Exposure Profiling

1° Spot with Digital Display

Flash Analyzing

Function

Flash Analyzing

Function

Series

World's First Multi-function Light Meter with Exposure Profiling

and Wireless Triggering.

The DIGITALMASTER L-758 Series was designed from its inception to offer today's

digital and film shooter with repeatable precision, accurate measurement and digital

exposure control that is necessary for today's photographer.

It offers cutting edge features never before available in any light meter and redefines

what a light meter is and why it's a critical tool for digital exposure control.

① Exposure Profiling

Up to three digital camera exposure profiles can be stored and recalled. Once selected, the

L-758 series can recall an exposure profile (from a digital camera or film) and display the dynamic

range and clipping point on the aperture scale or EV scale. Any compensation value that is

required to match the camera sensitivity is loaded into the appropriate measuring mode and

automatically applied to all measurement's.

② Data Transfer Software

The L-758 series light meters have a USB port built-in to connect the light meter to a computer

(Windows or MAC) with a USB cable. Exposure Profile Data is exchanged between the computer

and the light meter using the Data Transfer Software, which enable the photographer to input

the calibration compensation data directly in to the light meters programable memory chip.

③ Mid.Tone Adjustment Mode

④ Built-in Radio Transmitter (L-758DR)

⑤ 1 Degree Spot with Digital Display

⑥ Full, 1/2 or 1/3 Step Selectable Readings

⑦ Flash Analyzing Function

⑧ Memorize Up to Nine Readings

In either aperture or shutter speed priority, it can memorize up to nine readings in incident

and spot (reflected) mode simultaneously. Readings are on the aperture or EV scale.

⑨ Step Up Ring (Lens Hood)

The step up ring makes it possible to attach different diameter filters using the appropriate

step-up adapters in front of the 1° spot lens (up to 40.5mm filter thread).

It also acts as a lens hood preventing erroneous light measurement caused by lens glare and flare.

⑩ Custom Setting

The Custom Setting mode provides a quick and easy setup of individual meter preferences.

L-758DR/D have14 settings and the L-758CINE has 17 settings.

・EV scale

・Average

・Multiple Flash (Cumulative)

・Aperture Priority

・Shutter Speed Priority

・EV (Exposure Value)

・All Weather Design

・Auto Back Light

・Retractable Lumisphere

・Exposure Compensation in Incident and Reflected independently

・Dual ISO (ISO1 and ISO2)

・Auto Power Off

・Battery Indicator

・CINE speed (f/s)

・Tripod Thread

・Dioptor Adjustment

・Jog Wheel Lock

STEP 1 STEP 2 STEP 3

Photograph the Exposure Profiling

Target (optional) with your camera,

lighting (available or flash) and

measuring method (incident or

reflected light)

Analyze the Exposure Profile Target with

image-editing software, and input the data

to Data Transfer Software.

After input, connect PC and light meter via

USB cable to transfer the data.

CAMERA 3

CAMERA 2

CAMERA 1

Profiles can be stored and recalled. Setting the L-758DR

to perfectly match specific digital cameras sensitivity

is quickly done by selecting one of the camera memory

modes (camera 1, camera 2 or camera 3).

Camera2: Aperture scale in Cord Flash

mode with "Inside range" display of

dynamic range and clipping point

Camera3: High-end digital back with

"Outside range" display of dynamic range

and clipping point.

L-758 series can memorize measured values in both incident and reflected modes independently or combined. When the memorized values are

combined it is possible to take a mid-tone measurement using the Lumisphere in incident mode, than take a spot highlight, and shadow measurement

by simply switching to reflected measuring mode. Highlight and shadow tones can be measured and quickly viewed to determine if there are

within the Dynamic range or Clipping points of the digital camera or type of film being used. In addition, the Mid.Tone value can be shifting to

adjust the highlight or shadow to be within the range required.

The rectangular 1° spot viewfinder displays f-stops, shutter speed, percentage of flash and much more with an

EL (Electronic-Luminescent) digital display.

It can instantly be switched from incident to spot measurement mode. With its super sensitive sensor, the

L-758 series can measure the reflected flash output down to an amazing f/2.0 and ambient measurements as

low as EV1.

In all flash modes, the L-758 series simultaneously reads both flash and ambient light automatically in order to analyze

and display the exposure data in 3 convenient ways:

1.Combined readings of flash and ambient

2.Percentage of flash in the total exposure

3.Simultaneous display of flash, ambient and combined readings on the analog scale.

Flash: 80%

Flash: 60%

Flash: 20%

Percentage of

flash in total

exposure

Combined flash/ambient

FlashAmbient

Up to nine measured values can be memorized in both Incident and Reflected modes

Independently or Combined

Incident light

1° Spot (Reflected)

Switchable

Ambient light

Flash light

Special Features for

Cine and Video

① Aperture Scale of F0.5 to F64 in 1/3 stop

increments.

② Wide Range of CINE Speed from 1 to 1000 f/s

③ Filter Factor Compensation

When using L-758CINE for cine/video exposures, it is

possible to set 7 different frequently used types of filters.

(Kodak Wratten Filters)

④ Shutter Angle settings are available from

1° to 10° in 1° increments, 15° to 270 in 5°

increments, as well as 12°, 17°, 22°, 144°

and 172°.

⑤ Illuminance and Luminance

It is possible to display Lux, Foot-Candle, Cd/m2 and

Foot-Lambert.

Mid.Tone F5.65

Measure and memorize

the Highlight F160

Measure and memorize

the Shadow F2.03

Up to nine measured values can be memorized in both Incident and Reflected modes

Independently or Combined

Camera1:Latitude Warning on EV scale

With it's unique exposure profiling capabilities, the DIGITALMASTER L-758 series is the only light meter that can compensate

and be calibrated to the sensitivity of your D-SLR, digital back or favorite film. Exposure latitude warning indicator, alert the

photographers when the lighting situation is exceeding the dynamic range of the camera or film before the image is captured.

To ensure repeatable accurate and consistent results for tonal range and digital exposure or film control, put the power of

control in the palm of your hand, DIGITALMASTER.

1 2 3 4

Kommentare zu diesen Handbüchern

Keine Kommentare

Sekonic L-758 Spezifikationen Seite 3

Kommentare zu diesen Handbüchern